{"product_id":"oneup-iscg05-v2-bash-chain-guide","title":"OneUp ISCG05 V2 Bash Chain Guide","description":"\u003ch1 style=\"text-align: center;\"\u003eOneUp ISCG05 V2 Bash Chain Guide\u003c\/h1\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eEliminate dropped chains\u003c\/strong\u003e forever with the new OneUp Components Bash Guide\u003c\/span\u003e\u003cspan\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAs the trend for lower and slacker bikes continues, chainring protection is becoming even more important. Revised for 2019 the OneUp Bash Guide uses simple, one tool installation and adjustment as well as an\u003cspan\u003e all new\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003etool less flip\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe OneUp Bash Guide was developed with input from top EWS World racers and can be seen all over this years circuit. Reinforced Nylon bash guards and a back plate cut from 8mm thick 7075-T6 aluminum, ensure that the OneUp Bash Guide can handle the biggest hits, but at a weight of only \u003cstrong\u003e105g (34T)\u003c\/strong\u003e you may forget it’s even there.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eNot Just For Enduro Racers\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig.  With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention.\u003c\/p\u003e\n\u003cp\u003eThe OneUp Bash Guide includes 3 different sizes of bash plate for compatibility with chainrings from 28-36T. \u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003eFeatures\u003cbr\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eTool less upper guide flip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eInstall without removing your crank\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eSingle tool install and adjustment\u003c\/li\u003e\n\u003cli\u003eBoost compatible\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOval Compatible\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBlack Stainless Steel hardware \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eIncludes 3 bash plates (28-30T, 32-34T, 36T)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePatented US 10,053,188 Other Patents Pending\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cspan\u003eSpecs\u003c\/span\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eWeight:\u003c\/strong\u003e 90g 28-30T, 105g 32-34T, 110g 36T\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eCapacity:\u003c\/strong\u003e 28-36T \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eChainline:\u003c\/strong\u003e 7\u003c\/span\u003e\u003cspan\u003e.5mm adjustment \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount:\u003c\/strong\u003e ISCG05 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eBlack top guide piece included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial: \u003c\/strong\u003e7075 aluminum, top guide glass reinforced thermoplastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp dir=\"ltr\"\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecompatible with current Trek\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAlloy\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eSlash \u0026amp; Fuel EX (gen 6) frames. \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecompatible with Ibis Ripmo \u0026amp; Ripmo AF frames.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cp dir=\"ltr\"\u003e \u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\u003cstrong\u003eGuide Setup Instructions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cspan\u003e\u003cspan color=\"#404040\"\u003e1. Remove top guide \u003c\/span\u003e\u003cspan color=\"#ff0000\"\u003eby removing the front top guide nut with a 4mm hex (never adjust the rear T25 bolt).\u003c\/span\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e2. Set slider in the highest position (inserted a 4mm into the hole on the bottom left of the top device with the chain link symbol and backed it out anti-clockwise)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e3. Hold backplate directly against ISCG05 tabs. \u003c\/span\u003eCheck for clearance between the back side of the bashplate\/guide and the bike frame (use included 2.5mm spacers if necessary to space the backplate away from the frame).\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cspan\u003e4. Rotate backplate until slider adjustment bolt is directly above the crank axle and torque bolts to 5Nm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e5. With crankset and chain installed, use spacer shim block to measure clearance between back plate and chain\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6. Determine the corresponding number of chainline shims required\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e7. If more than 5 shims are required, install the supplied 2.5mm washers behind the backplate and return to step 2\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e8. Assemble top guide with spacers and tighten bolt to 3Nm\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e9. Insert a 4mm hex through the hole in the inner top guide, loosen height adjustment bolt and lower the tool onto the chain.  Torque to 3Nm to set height.\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBash Replacement Instructions\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cdiv\u003e\n\u003cspan\u003e1. Remove Bash Guide from bike\u003c\/span\u003e\n\u003cdiv\u003e\u003cspan\u003e2. Remove bolt retaining clip from rear bash plate bolt by pushing a 4mm hex through the bolt from the backside of the guide.\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e3. Remove Bash bolts using a 5mm hex\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e4. Select desired bash plate and reinstall bash bolts to 6Nm\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e5. Reinstall bolt retaining clip on the rear bash plate bolt\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv\u003e\u003cspan\u003e6. Reinstall Bash Guide onto bike\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"OneUp","offers":[{"title":"Default Title","offer_id":43104201572483,"sku":"210000188295","price":129.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0197\/4199\/9204\/products\/oneup-iscg05-v2-bash-chain-guide.jpg?v=1766426906","url":"https:\/\/unitedsport.ca\/products\/oneup-iscg05-v2-bash-chain-guide","provider":"United Sport \u0026 Cycle","version":"1.0","type":"link"}